Showing posts with label jump rings. Show all posts
Showing posts with label jump rings. Show all posts

Friday, 13 August 2010

More helm chain with beads

n the last post I mentioned I had made a pendant and earrings to match the sterling silver helm chain bracelet with red beads I showed a photo of. The earrings and pendant are made from 1 mm sterling silver wire. The larger rings have a 6 mm inner diameter while the smaller rings have an inner diameter of 3.25 mm.


Sterling silver helm chain pendant

As you can see, on the pendant it made more sense to me to place all the beads around the outside of the pendant.


Sterling silver helm chain earrings

But with the earrings I decided to stagger two beads and then used a single smaller jump with bead at the bottom of the earring to hold the lowest two large loops shut, until I did that, the lower two loops had a habit of opening and allowing the bead above them to slide down.
The pendant is hung from two sections of belcher chain using 2 small jump rings. I decided that hang the pendant from two points rather than one gave a better display of the piece as hanging from one link caused the pendant to elongate into an oval shape rather than a circle. This is because the gaps between rings are slightly larger than one that would allow the pendant to hold a circle shape - but when I tried using jump rings with an inner diameter of 3 mm instead of 3.25 mm I could not get the elements together so had to go back to the 3.25 mm inner diamter smaller rings. The two rings holding the pendant to the chain are actually only 3 mm innner diameter as I did not want them to be really obvious and get in the way of seeing the pendant.

Thursday, 5 August 2010

Lead up to my first sale

As I've already mentioned, I discovered chain maille last year, and that is what started my progression towards where I currecntly am with my jewellery making.
Silver jump rings

Since I discovered chain maille I've become addicted to creating pieces of chain maille jewellery using mostly my favourite Byzantine weave and more recently a few other weaves.

I have found that I really enjoy taking a pile of insignificant looking silver jump rings (like those to the right) and turning that pile of metal loops into a beautiful wearable pile of metal.

My first love is the Byzantine weave, partly because it is deceptively complicated. I find it very easy to create Byzantine weave quickly and sometimes find ways to use it that are not in the book I learnt it from. From the first pieces that I made which were copied from the book, I have enjoyed including beads of various shapes and colours into my pieces.

The first bracelet I made used silver plated jump rings I had cut myself and purple glass beads. The result looks good from a distance, but close to you can see the problems with it.

Silver plated Byzantine weave with purple beads

As you can see, the jump rings are not cut cleanly as I used half flush cuters to cut them. Half flush cutters create two different shaped faces in the cut metal, one face is flat and the other is pointed where the blades met - this causes unsightly gaps and makes it difficult to close the jump rings at times. Also, the wire sections used to hold the beads is made with much thinner wire which lookings out of place.

But I am still pleased with the results, and the fact that wearing this bracelet around the office led to my first jewellery sale.

More next time
Anne